 |
ANC Dock Wheels are needed when winds and currents
make docking difficult. These wheels are molded of thick marine grade
vinyl to with stand rough treatment and harsh marine conditions. The
wheels have a molded-in hub and axle, so there are no metal to metal fittings to rust or corrode. This
unique design ensures years of trouble free use and aids the boater while
maneuvering in and out of the slip. All of the wheels are factory
inflated so they never go flat. |
|
 |
The rings of holes around our dock wheels offer
much more protection and cushion than a single wall dock wheel. |
|
| Astro dock
wheels come in 10" and 14" sizes, are available in corner bracket or straight
bracket. Double corner wheels are available in 10" and 14" sizes for
larger boats or where severe cross wind situations exist. All corner
wheels have heavy steel brackets that are hot dipped galvanized. |
 |
10 Inch Dock Wheel - corner and side mount
A general purpose dock wheel for boats up to 30 feet.
It will mount on the corner of side of the dock. The direct corner mount
gives added strength to the mounting.
(corner bracket shown) |
 |
14 Inch Dock Wheel - corner and side mount
Side Bracket - The side bracket is designed to be mounted
along the finger of the dock to help guide the boat into the slip.
Corner Bracket - The Astro 14 inch corner wheel with its unique design
ensures years of use while aiding the boater in and out of the slip.
(corner bracket shown) |
 |
Double Dock Wheel - corner and side mount
10 Inch - The double wheel set-up has a heavy duty bracket sides
for a more secure mounting. For boats up to 30 feet.
14 Inch - This double wheel set up will handle boats larger boats and slips
that have cross-wind situations. It's double wheels spread the load
over a larger area of a vessel's hull.
(14 inch corner mount shown) |